There are a number of potential issues that you can run across when configuring a Rockspace wireless range extender. Failure to connect to the WiFi network of the extender is one frequent problem. Wrong login information or wrong setup settings on the extender’s configuration page could be to blame for this. You might also run into problems with the extender’s firmware or with where you put it in your house or office. In this article, we’ll talk about various issues with the Rockspace extender setup that you could encounter and how to fix them.
Extender Does Not Connect
One of the most frequent mistakes people make while configuring the Rockspace WiFi extension is this one. Make sure the extender turns on and links to a power source in order to fix this problem. Next, join the WiFi network of the extender with your computer or mobile device. Try resetting the extender and going through the setup procedure again if you still can’t connect.
Using The Wrong Credentials
During the Rockspace extender setup procedure, you will be required to input your login information for the extender’s web interface. Incorrect credentials will prevent you from accessing the interface and configuring the device. Verify that you are using the right login and password to correct this issue. Try resetting the extension to its default settings and use the default login credentials if you can’t recall your login information.
Having A Weak Signal
It’s possible that the Rockspace extender doesn’t install improperly if you are still facing a weak signal after setting it up. Make sure the extension positions are in the middle of the room, far from any furniture or wall barriers. You will need to tweak the antennas to strengthen the signal.
WiFi Network Doesn’t Compatible
With the majority of common WiFi networks, the Rockspace extension intends to function. The extension might not operate, though, if your network has an unusual configuration or security protocol. Make sure your WiFi network is set up to work with the Rockspace WiFi extender in order to fix this error.
Error During Firmware Update
Rockspace periodically provides the extender’s latest firmware version to enhance performance and address issues. Make sure you are choosing the appropriate firmware version for your device if you experience a problem while updating the firmware. On the Rockspace website, you can get the most recent firmware. If the issue still exists, consider restoring the extender to its factory defaults and running the firmware upgrade procedure once more.
A great wireless range extender that can strengthen your WiFi signal and expand its reach is the Rockspace extender. However, it may experience issues throughout the setup procedure, much like any electronic item. Try the troubleshooting techniques we have covered if you experience any of the errors listed above.
We hope that after reading this post, your Rockspace extender configuration issue now resolves. However, if you are experiencing another issue, talk to our technician about it.
