There are many solving tips, by which you can easily tackle the Rockspace extender issues smartly or in less time. If you face any error in the working then you will need to read this entire page. Let’s jump into the process.
Change Rockspace Extender Placement
Due to the wrong placement of the Rockspace WiFi range extender, you can face trouble. To eliminate this issue, we suggest you place your WiFi range extender device at the central location of your house and office. Also, check that your extender device does not be located near metal or electronic appliances. The metal and electronic appliance absorbs all the WiFi signals which come from the router and extender gadget. After doing this, we hope your Rockspace extender issue is solved. If not, then try another solution.
Improve Rockspace Extender Program
To improve the program of the Rockspace extender device you will need to visit the Rockspace extender web management page. After that, you will need to tap on the administration option and then tap on the firmware option. Next, download the firmware file on your laptop or on your computer. Hence, by doing this the Rockspace extender issue is solved.
Reset Rockspace Extender Gadget
By pushing the back reset hole button for 8 to 10 seconds with the help of a paper clip, you will successfully reset your Rockspace extender device.
Note: After doing the reset method, you will need to do the Rockspace WiFi extender setup process again. If you forget the setup process or don’t know the proper setup process then read the lower login and configuration information.
Access Into Rockspace Extender Login Page
First, connect your cell phone or desktop device to the Rockspace extender network by WiFi. The SSID will be the Rockspace EXT network. Now, open the web browser and write the default IP address 192.168.0.254 in the navigation location bar. Next, fill in all the login credentials which are shown on the display page. In the end, after doing this Rockspace WiFi range extender login process is completely done.
Without Ethernet Cable Do Rockspace Extender Setup
First, settle the Rockspace WiFi range extender device into a power socket. After that, verify that both the extender and router are located in the same room. Now, push that WPS button which is located on your host router. Next, in two minutes push the extender WPS button. After that, the solid WPS LED starts blinking on both the extender and router device. Hence, it means your Rockspace extender device is successfully linked with the host router.
Without WPS Method Do Rockspace Extender Configuration
First, by ethernet cable connect the extender to the WiFi-containing gadget. After that, open a web browser and enter the IP or web gateway in the navigation URL bar. Now, the extender login page will open on your screen. Next, fill in all the login credentials. Then, tap on the extender option and follow all the information which are shown on the Rockspace WiFi extender page.
As of now, with the assistance of the above tips you can easily solve the Rockspace WiFi extender setup issues. In case, after trying those tips if the issue is not solved then try to contact our team experts.
