In any case, you start getting errors while accessing the rockspace web setup portal. In that case, you will not be able to set up and manage the network after setting it up. But, there can be a number of causes behind this issue, including a technical error in the Rockspace device or in the web setup portal. But, we have got some resolving points along with the possible causes which are covered in this blog. So, check them and use the solutions appropriately.
Technical Error In The Rockspace Portal
By searching the Rockspace default web address, if there is an error like re.rockspace.local not working. There can be a technical glitch from the site’s backend or the web address you are searching is not perfect. So, check that address once and verify it while inserting it again.
Apart from that, you can opt to search for the Rockspace default IP address instead of the web address. Searching for this address will also bring you to the same page without getting any errors. So, take the accurate IP credential from the device manual setup guide and fill in it error-free.
Rockspace Device Malfunctioning
If the error still persists, there could be the Rockspace device malfunctioning for sure. So, try rebooting the device and plugging it in again but after waiting for some time. Giving some rest to the device can actually help a lot in removing the error from the network. So, take out the device from the power outlet and choose another power socket and a different location while plugging it in this time. Lastly, try to access the web setup portal using any device’s web browser.
Connection Timed Out Error
There can be a case in that you take more time than usual while entering the Rockspace web or IP address in the search bar. If you are doing this thing, there will be a connection timed-out case and the setup portal will not be accessible to you. So, utilize as little time as you can to insert the default web or IP address and click on the enter button quickly. The re.rockspace.local not working error will resolve now.
Reset The Rockspace Device
If every point fails from the above-mentioned solutions, then you must prefer to reset the device. You might configure the device in an imperfect way or use inaccurate information. This is why you will require to do the setup again after resetting the older settings. To do this, press the reset button from the device’s panel and hold it for a few seconds. The device will start resetting itself and the blinking light will notify you about this. After doing this, configure your device again but with accurate credentials.
Thus, the Rockspace web portal error will resolve now after applying these troubleshooting tips to the network. But, still, if you are not accessible to that portal, take more help from our team of experts. We will assist you with some other resolving tips.