Rockspace extender problems can be solved quickly and intelligently using several problem-solving techniques. Any problems you encounter with the network must be resolved by reading this page in its entirety. Let’s start the procedure now.
Location of The Rockspace Extender
It is possible to cause problems with Rockspace WiFi range extenders if they are placed incorrectly. Our suggestion is to place the WiFi range extender centrally. As possible in your home or office to eliminate this problem. Check to make sure that your extender device is not located near metal appliances or electronic devices. All WiFi signals are absorbed by the metal and electronic gadgets used to connect to the router and extender. Hopefully, this will fix your Rockspace extender issue. Consider another solution if this does not work.
Resetting Rockspace Extender
Using a paper clip, you can push the back reset hole button for 8 to 10 seconds. In order to successfully reset your Rockspace extender device by using the back reset hole button.
Note: The Rockspace extender setup process will have to be done again after you do the reset method. Check out the lower login and configuration information if you don’t know the Rockspace extender setup process.
Getting Into Rockspace Extender
Start by connecting your phone or desktop to the Rockspace extender. Enter 192.168.0.254 as the default IP address of the extender. The SSID will be the Rockspace EXT network. Once you’ve filled out all your login credentials on the display page, you’re ready to log in to your Rockspace WiFi range extender.
Setup Rockspace Extender With WPS
Ensure that the Rockspace WiFi range extender is located in the same room as the router and extender. When you have completed this step, turn on your router and press the WPS button. Press the wireless extender button two minutes after starting the process. After that, both the extender and router have a solid WPS LED blinking. This means the Rockspace extender has been successfully connected to the router.
Configure Rockspace Extender Without Using WPS
First of all, the extender needs to be connected to a Wi-Fi-enabled device by an Ethernet cable. Then, you need to open your web browser and enter the web gateway URL in the navigation bar. The extender login page will appear now. Just fill out all of the login credentials and follow all of the instructions on the Rockspace WiFi extender page on how to set it up. After that, tap on the extender option and follow the instructions as they show on the Rockspace WiFi extender page.
In the meantime, you can easily resolve Rockspace WiFi range extender setup issues using these tips. If, after trying those suggestions, the issue persists, please feel free to contact our team experts at .
