Setting up your Rockspace WiFi device is crucial. It is a process that must be done to get going with your wireless WiFi network. Generally, it is a quick and easy process. But sometimes, or for some users, it can be challenging and a bit complex. There you need the right instructions, guidance, and assistance to execute the Rockspace WiFi device setup correctly.
Unboxing The Rockspace Device And Examining the Components
Let’s start this simple process by unpacking the device and its accompanying accessories. Inside the box, you should find the router, antennas, power adapter, and an Ethernet cable. Make sure all the devices are in good condition. You should properly examine the appearance, labels, and finish of all the components you will find inside the kit.
Connect The Ethernet Wire With The Device
If the WiFi range is extremely partial then unplug the ethernet wire from the back of the device. Re-plug it after a while tightly into the port of the computer or the other device you are using. Now see whether you are back actively with the internet connection or you are still backwire. If yes then do not worry and slip over the next step.
Keep The Devices Close
While you do all these changes also make sure you keep the device close to each other. The space division can also improve the performance of any device. So try to keep the devices near each other. But if you have tried everything and now you are up to doing every possible change.
Check The Web Address For Setup
If you are losing the internet speed and connection so often then, you need to check the web address you are putting into the URL port. As for a good internet connection, the correct Web address matters a lot. So tweak the setting and log into the portal re.rockspace.local setup is the only way. After reaching the portal a page will become visible to you in which two boxes will be enabled. One will ask to fill in the details of the Username and the second will ask for the Password. So add admin in the Username and the password space as well. Once see the settings security page it means you are successfully done with the process. Save the settings now.
Login and Setup
Log in to the router’s web-based setup page using the default login credentials (usually “admin” for both the username and password). If you haven’t changed these credentials, it is recommended to do so for security purposes. Follow the on-screen instructions to complete the initial setup, including configuring your Wi-Fi network name (SSID) and password.
We hope, by following these steps, you should have successfully set up your device, providing a stable and high-speed Wi-Fi connection for your home or office.
