You can set up the Rockspace repeater at re.rockspace.local by logging in. But, there will be a problem with the original website address after installation. Is re.rockspace.local accessible if the login page is down? Update the firmware of the extender if any adjustment is required.
Access The Rockspace Repeater By Signing In
- Connecting a PC and an extender is the first step.
- Then, link your Rockspace extender to WiFi using a PC.
- Look for the “Rockspace_EXT” network in the network list on your WiFi device.
- Run a search engine after connecting to the extender’s WiFi network.
- Then, you need to type re.rockspace.local in the URL bar.
- The login page is now also visible on your display.
- The Rockspace extender login screen is now accessible using the username and password.
Link By Using A Wire
- First, get an Ethernet cable which must be the latest.
- The Ethernet cable’s other end should connect to the router’s port.
- Additionally, connect the Ethernet wire’s other end to the extender’s Ethernet port.
- It is now time to connect Rockspace’s router and extender cord.
- Wait a few minutes before checking the LED once it turns completely blue.
- As a result, the router can connect to your Rockspace extender.
Installing The Modem And Router
Rockspace WiFi routers are used by more and more people because of their wide coverage, toughness, and excellent performance. The procedures listed below must be carried out in order to configure a Rockspace wireless router and gadget utilizing the WiFi password.
You must complete the configuration process and download a few things in order to speed up the procedure. Before beginning the network configuration, spend the next five minutes acquiring this information.
Typical Extender Mistakes
- The laptop or PC doesn’t have access to the internet.
- The extender displays a re.rockspace.local error.
- Having problems connecting to the router with the extender.
- The router’s IP address only acknowledges the WiFi signal.
- The security password is ineffective.
Resolve The Error Of Rockspace WiFi Device’s
Using these suggestions, you could resolve the problem with re.rockspace.local not working.
Take A Look At The Cable Connections
Each cable that attaches to your Rockspace extender should be examined. Any broken wire you need to replace as quickly as possible with fresh ones. After the wire switch, make sure your PC and laptop are working. You might feel safer if your laptop and PC show WiFi or internet connections.
Reset Your Rockspace WiFi Repeater
If you’ve tried the above advice but continue to experience issues, check out this final strategy. The following activities must be taken into account.
- First, locate the reset button. Take a paperclip next, which is typically found on the back of an extender.
- Put a safety pin in the reset hole button’s button for 8 to 10 seconds.
- Wait a few minutes after the bell-like sound.
- Your extender device gets reset by doing this.
Note: After the reset, you need to do the Rockspace extender configuration process.
We anticipate that you can set up the rockspace extender after carefully reading this page. Check out the suggestions for fixing the re.rockspace.local not working issue as well. In case you run across any issues, ping us. We’ll collaborate with you to find a solution to the extender problem. You can call us at or you can mail us at .
